Project Description

Recording Media
Recording Media SD card (64 MB to 2 GB), SDHC card (4 to 32 GB)
Recording Format
WAV/BWF 44.1, 48, 96 kHz/ 16-, 24-bit
Channels
Number of Channels 4 (2x stereo)
Analog Audio Inputs
Connectors 2x Combination XLR/TRS (XLR = 1: ground, 2: hot, 3: cold)
1x 1/8″ (3.5 mm) microphone input stereo mini jack with plug-in power
1x 1/8″ (3.5 mm) camera input stereo mini jack
Input Impedance XLR/TRS Set to Mic/Mic + Phantom: 2 kOhms
XLR/TRS Set to Line: 10 kOhms
1/8″ Mic Input: 10 kOhms
1/8″ Camera Input: 10 kOhms
Phantom Power XLR/TRS Set to Mic/Mic + Phantom:
48 V +/-4 V(10 mA/CH) / 24 V +/-4 V(10 mA/CH)
Maximum Input Level XLR/TRS Set to Mic/Mic + Phantom: 0 dBu
XLR/TRS Set to Line: + 24 dBu
1/8″ Mic Input: +10 dBV
1/8″ Camera Input: +6 dBV
Standard Input Level XLR/TRS Set to Line: + 4 dBu
1/8″ Camera Input: -10 dBV
Minimum Input Level XLR/TRS Set to Mic/Mic + Phantom: -72 dBu
1/8″ Mic Input: -50 dBV
Microphone Input Gain XLR/TRS Set to Mic/Mic + Phantom:
Low: +11 dB
Mid: +36 dB
High: +52 dB
High PLUS: +64 dB

1/8″ Mic Input:
Low: +3 dB
High: +26 dB

Analog Audio Inputs
Connectors 1x 1/8″ (3.5 mm) camera out stereo mini jack

1x 1/8″ (3.5 mm) line out stereo mini jack
Output Impedance Camera Out: 200 Ohms

Line Out: 200 Ohms
Standard Output Level Camera Out: -50 dBV
Line Out: -10 dBV
Maximum Output Level Camera Out: -30 dBV
Line Out: +10 dBV
Headphone Output
Connector 1/8″ (3.5 mm) stereo mini jack
Maximum Output Level 50 mW + 50 mW
USB
Type Mini-B type
Format USB 2.0 high speed mass storage class
Remote
Connector 2.5 mm TRS jack for optional remote
Power
Power Sources 4x AA batteries (Alkaline or Ni-MH)
USB bus power
Optional AC Adapter
Optional external battery pack
Power Consumption 5.4 W
Battery Operation Time Recording 2 channels of 44.1 kHz/16-bit WAV
Alkaline Batteries (EVOLTA): 2.5 hours (approximate, with phantom power); 4.5 hours (approximate, with no phantom power)
Ni-MH Batteries (eneloop): 3 hours 15 minutes (approximate, with phantom power); 5 hours (approximate, with no phantom power)
Ni-MH Batteries (eneloop pro): 3 hours 45 minutes (approximate, with phantom power); 6 hours (approximate, with no phantom power)
Audio Performance
Frequency Response 20 Hz to 20 kHz +0.5/-2 dB (line in or mic in to line out, Fs 44.1/48 kHz, JEITA)
20 Hz to 40 kHz +0.5/-3 dB (line in or mic in to line out, Fs 96 kHz, JEITA)
Distortion 0.02% or less (line in or mic in to line out Fs 44.1/48/96 kHz, JEITA)
Signal to Noise Ratio 92 dB or more (line in or mic in to line out Fs 44.1/48/96 kHz, JEITA)
Equivalent Input Noise -120 dBu or more